BTU Bench

What size mini split for a bedroom?

Most bedrooms need the smallest mini split on the market. Here is the BTU for each common bedroom size, plus what matters for sleeping: noise, airflow and where the head goes.

Answer: a typical 168 sq ft bedroom needs about 6,000 BTU per hour, which is a 6,000 BTU mini split. The chart below covers other sizes and conditions.

Mini split size for a bedroom: BTU chart

BTU per hour with the mini split size in brackets, for an 8-foot ceiling and a moderate climate. Columns: normal sun, very sunny, sunny, hot climate. Hot climates add 10%, desert climates 20%.

SizeNormal sunVery sunnySunny, hot climate
10 × 10 ft (100 sq ft)5,000 (6,000 BTU)5,500 (6,000 BTU)6,100 (6,000 BTU)
10 × 12 ft (120 sq ft)5,000 (6,000 BTU)5,500 (6,000 BTU)6,100 (6,000 BTU)
12 × 12 ft (144 sq ft)5,000 (6,000 BTU)5,500 (6,000 BTU)6,100 (6,000 BTU)
12 × 14 ft (168 sq ft)6,000 (6,000 BTU)6,600 (9,000 BTU)7,300 (9,000 BTU)
14 × 14 ft (200 sq ft)6,000 (6,000 BTU)6,600 (9,000 BTU)7,300 (9,000 BTU)
15 × 16 ft (240 sq ft)6,000 (6,000 BTU)6,600 (9,000 BTU)7,300 (9,000 BTU)
15 × 20 ft (300 sq ft)7,000 (9,000 BTU)7,700 (9,000 BTU)8,500 (9,000 BTU)
20 × 20 ft (400 sq ft)9,000 (9,000 BTU)9,900 (12,000 BTU)10,900 (12,000 BTU)

What matters in a bedroom

  • Noise. Compare the indoor head's lowest sound level in decibels. Many 9,000 BTU heads run around 20 to 25 dB on low, quieter than a whisper.
  • Airflow. Mount the head where it doesn't blow directly onto the bed, usually on the wall opposite or beside the bed.
  • Oversizing. A bedroom unit that is too big cools quickly and stops removing humidity, which leaves the room cold and clammy at night. This is the most common mistake.
  • Sleep mode. Most units have a mode that raises the set point slowly overnight, which saves energy and avoids waking up cold.

The smallest common size is 9,000 BTU. A few brands sell 6,000 BTU heads; if you can't find one, a 9,000 BTU inverter unit will turn down for a small room.

Check your own bedroom

The calculator starts with the settings used for the answer above. Change any of them to match your space.

Your space

Units
Or fill in length and width below and we work out the area.
Sun exposure

Your bedroom

—
BTU per hour
Chart value for this area
—
Area used
—
Same load in tons
—
Recommended: —

Frequently asked questions

What size mini split for a 12 × 12 bedroom?

A 12 × 12 bedroom is 144 sq ft and needs about 5,000 BTU in normal conditions, so a 6,000 BTU mini split. Most buyers end up with a 9,000 BTU unit, the smallest size most brands sell.

Is 12,000 BTU too much for a bedroom?

For a typical bedroom under 300 sq ft, yes. It will short-cycle and leave humidity behind. 12,000 BTU suits a large primary bedroom of 450 to 550 sq ft, or a smaller one with very strong sun in a hot climate.

Can one mini split cool two bedrooms?

Not well. Each indoor head only cools the room it is in. For two bedrooms, use a dual-zone system with a head in each room.

Mini splits for other spaces