Mini split size for a attic room: BTU chart
BTU per hour with the mini split size in brackets, for an 8-foot ceiling and a moderate climate. Columns: well-insulated roof, average, poorly insulated roof. Hot climates add 10%, desert climates 20%.
| Size | Well-insulated roof | Average | Poorly insulated roof |
|---|---|---|---|
| 10 × 15 ft (150 sq ft) | 5,000 (6,000 BTU) | 5,500 (6,000 BTU) | 6,300 (6,000 BTU) |
| 10 × 20 ft (200 sq ft) | 5,900 (6,000 BTU) | 6,600 (9,000 BTU) | 7,600 (9,000 BTU) |
| 15 × 20 ft (300 sq ft) | 6,900 (9,000 BTU) | 7,700 (9,000 BTU) | 8,900 (9,000 BTU) |
| 20 × 20 ft (400 sq ft) | 8,900 (9,000 BTU) | 9,900 (12,000 BTU) | 11,400 (12,000 BTU) |
| 20 × 25 ft (500 sq ft) | 11,900 (12,000 BTU) | 13,200 (18,000 BTU) | 15,200 (18,000 BTU) |
| 20 × 30 ft (600 sq ft) | 13,900 (18,000 BTU) | 15,400 (18,000 BTU) | 17,700 (18,000 BTU) |
Why attic rooms run hot
The sun heats the roof all afternoon, and in an attic room the roof is the ceiling, often with only a thin layer of insulation behind sloped drywall. Warm air from the rest of the house also rises into it. We treat every attic room as very sunny (+10%) and adjust for how well the roof is insulated.
Sloped ceilings mean less air volume than a flat 8-foot ceiling of the same floor area, but the hot roof surface more than makes up for it. Use the floor area and don't reduce it for the slope.
Where to put the head
- On a gable end wall, where there is full height and the line set can run straight outside.
- Not on a knee wall below the slope, where the airflow hits the ceiling straight away.
- Keep the line set and condensate drain within the manufacturer's maximum length and lift; attic rooms are often far from the outdoor unit.
Adding insulation to the roof slope, or a radiant barrier, is one of the few upgrades that changes an attic room's load a lot.
Check your own attic room
The calculator starts with the settings used for the answer above. Change any of them to match your space.