BTU Bench

What size AC unit for a 1,200 sq ft house?

The central air conditioner or heat pump size for a 1,200 square foot home, and how climate and insulation change it.

Answer: a 1,200 sq ft house needs about 21,600 BTU per hour of cooling in a moderate climate with average insulation. That is a 2 ton central AC. Depending on climate and insulation the load runs from 15,300 to 35,900 BTU.

1,200 sq ft AC size chart

BTU per hour with the standard central AC size in brackets. 8-foot ceilings and normal sun.

Summer climateGood insulationAveragePoor insulation
Cool summers15,300 (1.5 ton)18,000 (1.5 ton)20,700 (2 ton)
Moderate18,400 (1.5 ton)21,600 (2 ton)24,800 (2 ton)
Hot22,400 (2 ton)26,400 (2.5 ton)30,400 (2.5 ton)
Desert26,500 (2.5 ton)31,200 (2.5 ton)35,900 (3 ton)

A house with 10-foot ceilings needs about 27,000 BTU in a moderate climate (2.5 ton). For one open area of 1,200 sq ft cooled by a single mini split, see what size mini split for 1,200 sq ft.

Running cost

A 21,600 BTU system rated SEER2 15 uses about 1.4 kWh for each hour it runs at full output. At 17 cents per kWh and 8 hours a day, that is about $59 a month at the height of summer. Try your own numbers in the running cost calculator.

Before you accept a quote

  • Ask how the size was chosen. A contractor who measured windows and insulation and ran a Manual J is worth more than one who matched the old unit.
  • If the house also needs heat, compare the heating load too. In cold climates it can be larger than the cooling load; see the heat pump size calculator.
  • Check the ducts. Undersized or leaky ducts can make a correctly sized unit perform like a smaller one.

Check your own house

Your house

Units
Conditioned floor area only. Leave out the garage and an unfinished basement.
Sun on the house

1,200 sq ft house

—
BTU per hour
Standard size
—
Exact load
—
BTU per sq ft
—
Area used
—
Recommended: —

Frequently asked questions

How many tons of AC do I need for a 1,200 sq ft house?

About 2 ton (21,600 BTU) in a moderate climate with average insulation. Expect 2.5 ton in a hot climate and 2.5 ton in a desert climate.

How many BTU do I need to cool 1,200 square feet?

About 21,600 BTU per hour for a whole house in a moderate climate, or 18 BTU per square foot. The full range across climates and insulation levels is 15,300 to 35,900 BTU.

Is 2.5 tons too big for 1,200 sq ft?

For an average house in a moderate climate, probably. The load points to 2 ton. A larger unit makes sense only in a hot climate, with poor insulation or lots of west-facing glass. Ask for a Manual J calculation to settle it.

What size furnace for a 1,200 sq ft house?

In a cold-winter climate, about 33,600 BTU of heat output, which is a 40,000 BTU input furnace at 96% AFUE. See the furnace size calculator for your climate.

Other house sizes